Wiring - Harbor Breeze CHESHIRE II Manual Del Usuario

WIRING

WARNING: To reduce the risk of fire, electrical
shock, or personal injury, wire connectors provided with
this fan are designed to accept only one 12 gauge house
wire and two lead wires from the fan. If your house wire is
larger than 12 gauge or there is more than one house wire
to connect to the two fan lead wires, consult an electrician
for the proper size wire connectors to use.
CAUTION: Be sure wiring box is properly grounded
and that a ground (green or bare) wire is present.
WARNING: If house wires are different colors than
referred to in the following steps, stop immediately. A
professional electrician is recommended to determine wiring.
1. Choose wiring diagram (Fig. 1A, Fig. 1B or Fig. 1C) that
fits your situation and make appropriate wiring connections
as follows: [NOTE: For each wire connection below, use
one of the wire connectors (EE) provided, making sure to
screw wire connector (EE) on in a clockwise direction.]
1A. FAN AND LIGHT CONTROLLED BY PULL
CHAINS: Connect BLACK and BLUE wire from fan to
BLACK wire from ceiling. Connect WHITE wire from fan
to WHITE wire from ceiling. Connect GROUND
(GREEN) wire together from mounting bracket to
BARE/GREEN wire from ceiling. (Fig. 1A)
1B. FAN CONTROLLED BY PULL CHAIN, LIGHT BY
WALL SWITCH: If you intend to control the fan light with
a separate wall switch, connect BLACK wire from fan to
BLACK wire from ceiling. Connect BLUE wire from fan
to the BLACK wire from the independent wall switch for
the light. Connect WHITE wire from fan to WHITE wire
from ceiling. Connect GROUND (GREEN) wire together
from mounting bracket to BARE/GREEN wire from
ceiling. (Fig. 1B)
1C. FAN AND LIGHT CONTROLLED BY TWO WALL
SWITCHES: If you intend to control the fan and light with
separate wall switches, connect BLACK wire from fan to
BLACK wire from the independent wall switch for the
fan. Connect BLUE wire from fan to the BLACK wire
from the other independent wall switch for the light.
Connect WHITE wire from fan to WHITE wire from
ceiling. Connect GROUND (GREEN) wire together from
mounting bracket to BARE/GREEN wire from ceiling.
(Fig. 1C)
Note: Black wire is hot power for fan. Blue wire is hot
power for light kit. White wire is common for fan and light
kit. Green or bare wire is ground.
FAN AND LIGHT CONTROLLED BY PULL CHAINS
Fig. 1A
120 V Power
FROM
CEILING
FAN
FAN CONTROLLED BY PULL CHAIN, LIGHT BY
WALL SWITCH
Fig. 1B
120 V Power
FROM
CEILING
BLACK
FAN
FAN AND LIGHT CONTROLLED BY TWO WALL
SWITCHES
Fig. 1C
120 V Power
FROM
CEILING
BLACK
FAN
8
BLACK
WHITE
GROUND/GREEN (BARE)
WHITE
GREEN
BLACK
BLUE
WHITE
FROM FAN
BLACK
BLACK (WALL SWITCH)
WHITE
GROUND/GREEN (BARE)
WHITE
GREEN
BLUE
WHITE
FROM FAN
BLACK (WALL SWITCH)
BLACK (WALL SWITCH FOR LIGHT)
WHITE
GROUND/GREEN (BARE)
WHITE
GREEN
BLUE
WHITE
FROM FAN