6. When the radio or stand-alone battery is properly seated in the
pocket:
• On the IMPRES 2 Adaptive System, charging status will be
indicated by the associated pocket Status LED. The Display of
IMPRES 2 charger provides charging status associated with
Pocket #1 only.
• When charging the radio, charging status will be indicated by the
radio display indicator, and the LED charging indicator on the
radio.
7. The radio or stand-alone battery is ready for use when the Charging
status is Steady Green.
8. While in the charger, the radio may be turned ON only when the
Communications Module is detached from the charger. Otherwise,
turn OFF the radio.
Note: Grip the radio body when inserting, or removing the radio from
the charger. Avoid pulling the radio antenna when removing the radio.
Figure 1: Charging procedures.
12