Motorola PMPN4156 Guia Del Usuario página 47

Securing Charging Pocket to Multi-Unit Charger
AS000060A01 Charging Pocket
Figure 8: Securing charging pocket to Multi-Unit Charger base.
1. Plug in the USB connector and harness connector to the
receptacles on the base.
Note: USB or harness connector may not be available on some of the
Charger Pocket. Plug in the available connectors to the base.
2. Slot in the Charging Pocket to the base and ensure the Charging
Pocket is flushed into the Multi-Unit Charger. Affix the Charging
Pocket screw.
AS000061A01 Charging Pocket
47
USB Receptacle
Harness
Receptacle