Motorola PMPN4156 Guia Del Usuario página 50

Mounting Multi-Unit Charger to Wall Bracket
1. Position the wall mount bracket in the desired position, and mark
the location of the mounting holes on the wall surface.
Ensure the area behind the mounting surface is always
free of electrical wires, cables, and pipes before cutting,
drilling, or installing the mounting screws.
2. Mount bracket to wall using the appropriate mounting hardware
required for the type of wall material fixture it is being mounted to.
Drill based on the marked mounting holes on the wall surfaces.
3. Secure the wall bracket in position by installing mounting hardware
over the mounting holes on the wall bracket tightly.
Note: It is recommended to use 10-16x1-1/2" tapping screw and
washer (not included) on wood stud and solid-flat concrete/brick wall.
4. Hang the Multi-Unit Charger on wall bracket as show in Figure 10.
Table 14: Motorola Solutions Authorized Batteries
Part Number
NNTN8020 Lithium-ion Battery, 1700 mAh
NNTN8023 Lithium-ion Battery, 2200 mAh
PMNN4522 Lithium-ion IMPRES Battery, 3400 mAh
PMNN4801_ Lithium-ion IMPRES 2 Battery IP68 1900T
PMNN4802_ Lithium-ion IMPRES 2 Battery IP68 3400T
PMNN4582_ Lithium-ion IMPRES 2 Battery IP68 2900T
Description
50
Charging Pocket
MTP3000 and
MTP6000 Series