Installation Steps; Care And Cleaning - AVS Bugflector Instrucciones De Instalación

Installation Steps

Set the hood shield in place.
3
Insert (2) fasteners through hood shield and into the
holes in hood. NOTE: Ensure that hood shield is pushed
flat against hood for proper fastener installation.
5
Install bump ons at pre-cleaned locations on the
painted hood/fender surface.
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
hood shield
800-241-7219 • Visit us at lundinternational.com
© 2012 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Using a phillips screwdriver install (2) screws with (2)
4
Adjust bumper stops as needed to ensure hood shield
6
Lund International
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
washers through the hood inserts.
square hole
hood
hood insert
hood shield
washer
screw
DO NOT OVER TIGHTEN
clears grille and headlights.