BioTel Care BGM 4 Manual Del Usuario página 17

Important steps to follow if you see High or Low
If you see High or Low displayed, your blood glucose level may
be above 600 mg/dL or below 20 mg/dL. Wash your hands.
Dry your hands completely. Test again using fingertip testing.
DO NOT test on your palm or forearm. If you still receive the
same message, test your BioTel Care® BGM with a control
solution: refer to "Step-by- Step Guide to Control Testing." (pg.
19 ).
OPTIONAL: After successful data transmissions to the server,
you may receive a multiple choice question to answer. This
may be a question from your Health Care Provider or relate to
reordering supplies. Swipe up/down OR use the UP/DOWN
buttons to select the appropriate answer. Press on the option
OR use the ENTER button to transmit.
If Your Data Transmission is Not Successful
If the device cannot communicate with the server, the
following message will appear:
No network connection. Reading will be sent when a
connection returns.
Your test results will be stored in your device. You can send the
reading on your own by going into Logs from the main menu.
Select the unsent reading displayed in Logs and press the
Sync button to transmit. For the transmission to be successful,
network connection is required.
The meter will attempt to forward unsent readings
automatically every 15 minutes, or following the next sent
reading. Readings that have not been transmitted to the server
will be marked with a yellow circular hazard icon in the Logs
list.
IF DATA TRANSFER FAILS, YOU MAY USE THIS PRODUCT
LIKE ANY OTHER GLUCOSE METER. FOLLOW YOUR
HEALTH CARE PROFESSIONAL'S INSTRUCTIONS ON
TREATMENT.
Understanding Your Blood Glucose Test Results
Blood glucose value will vary depending on food intake,
medication, health, stress, and exercise. The ideal ranges for
people without diabetes are as follows :
1
17