Testing With Control Solution - BioTel Care BGM 4 Manual Del Usuario

• 70 to 100 mg/dL before meals, and
• 70 to 140 mg/dL after meals
What to do if you get high or low readings AND you feel
ill.
If the BioTel Care® BGM displays results that are "High" or
"Low," or you get a result that is more than 250 mg/dL or
below 50 mg/dL AND you feel ill:
• Treat your diabetes according to the instructions from your
Health Care Provider.
If the BioTel Care® BGM displays results that are "High" or
"Low," or you get a result that is more than 250 mg/dL or
below 50 mg/dL AND you DO NOT feel ill:
• Test your BioTel Care® BGM with a control solution: refer
to"Step-by- Step Guide to Control Testing." (pg. 19
• Wash your hands, dry thoroughly and test again using
your fi ngertip.
If you still get a high or low reading, contact your Health Care
Provider immediately.
References
1. American Diabetes Association. Standards of Medical Care in Diabetes—
2020. Diabetes Care. 2020; 43:S1-S212.
D.2 Testing With Control Solution
Control solution testing will confi rm that your BioTel Care®
BGM and Test Strips are working properly. You should perform
control solution testing when:
• Using the meter for the fi rst time
• Using a new bottle of BioTel Care® Test Strips
• You left the test strip bottle cap open
• You dropped the meter
• You suspect the meter and test strip are not working
properly
• The test results do not refl ect how you feel
18
)