BioTel Care BGM 4 Manual Del Usuario página 46

8. The screen will start to count down. After 6 seconds, the
control test result will appear on the meter's display screen.
9. Compare the reading on the screen to the "L1 Control
Solution" or "L2 Control Solution" range printed on the
test strip bottle or package. If the reading on the meter
falls within the appropriate range, select the YES tag. If
not, select the NO tag. If the reading falls outside the level
printed on the bottle or package that you used, please see
"Control Solution Troubleshooting" (pg. 21
Control Solution readings are
stored on the meter but are not
transmitted and displayed on the
server.
Important Tips About Control
Solution
1. Only use BioTel Care® Glucose
Control Solution with the BioTel
Care® Test Strips. The BioTel Care®
BGM is also compatible with the
Telcare® Glucose Control Solution
and Telcare® Test Strips. Other
brands of control solution or test
strips may produce inaccurate
results.
2. Always check the expiration date. DO NOT use expired
control solution.
3. DO NOT FREEZE. Store the control solution at room
temperature.
4. Never touch the tip of the control solution bottle to the test
strip. It will damage all remaining solution in the bottle.
5. Record the "date opened" on the bottle label.
6. Do not use the control solution if more than 3 months since
fi rst opened.
46
).
Control Solution
Range (Images are for
reference only. Actual
numbers may vary.)