General Information Specifications; Cm Repair/Replacement Policy; Series 635 Motor Driven Trolley; Series 635 Low Headroom Trolley - CM LODESTAR Manual De Funcionamiento, Mantenimiento Y Piezas

GENERAL INFORMATION
SPECIFICATIONS
The Lodestar Electric Chain Hoist is a highly versatile materials
handling device that can be used to lift loads that are within rated
capacity. The mechanical features of these hoists include an alloy
steel lift wheel, Load Protector, hardened steel chain guides,
hardened steel gear train, life-time lubrication, forged steel hooks
and lightweight aluminum frame. The electrical features include
hoist-duty motor, rugged hoist brake, magnetic reversing contactor
and voltage conversion board (dual voltage units). The hoist is
available with hook or lug suspensions that are supplied separately.
Table 1 summarizes the Lodestar Electric Chain Hoist models and
the Series 635 Trolleys available. It should be noted that standard
single speed hoists are available with 10 (3M), 15 (4.6M) and 20
(6.1M) foot lifts and the standard lift for two speeds hoists is 10 feet.
However, hoists with longer lifts are available on a special, per order
basis.
TABLE 1. SPECIFICATIONS
A. Lodestar electric chain hoists
Lifting
Maximum
Speed Per
Capacity Model
Min.
Ton (kg)
Ft. (m)
Single Speed 115-1-60
1/8 (125) A 32 (9.8)
1/8 (125) AA 60 (18.4)
1/4 (250) B 16 (4.9)
1/4 ((250g) C 32 (9.8)
1/2 (500) E 8 (2.4)
1/2 (500) F 16 (4.9)
1/2 (500) J 32 (9.8)
1 (1000) H 8 (2.4)
1 (1000) L 16 (4.9)
2 (2000) R 8 (2.4)
3 (3000) RT 5.5 (1.9)
Single Speed 230/460-3-60 or 220/380-3-50 or 220/415-3-50
1/8 (125) A 32 (9.8)
1/8 (125) AA 60 (18.4)
1/4 (250) B 16 (4.9)
1/4 (250) C 32 (9.8)
1/2 (500) E 8 (2.4)
1/2 (500) F 16 (4.9)
1/2 (500) J 32 (9.8)
1/2 (500) JJ 64 (19.6)
1(1000) H 8 (2.4)
1 (1000) L 16 (4.9)
1 (1000) LL 32 (9.8)
2 (2000) R 8 (2.4)
2 (2000) RR 16 (4.9)
3 (3000) RT 5.5 (1.9)
3 (3000) RRT 11 (3.8)
* Lifting and travel speed listed are for 60 Hertz units. For 50 Hertz units,
theses speeds will be 5/6 of those listed.
** A 1/2 H.P. (.37 kW) motor furnished on 380-3-50, 415-3-50 and 460-3-60 volt units.
Shortest
Motor Distance Net Weight
H.P. (kW) Between Hooks lbs. (kg)
in. (mm)
1/4 (.19) 14¼ (362) 53 (24)
1/2 (.37) 14¼ (362) 64 (29)
1/4 (.19) 14¼ (362) 57 (26)
1/2 (.37) 14¼ (362) 65 (29.5)
1/4 (.19) 17 1/8 (454) 68 (31)
1/2 (.37) 14 ¼ (362) 64 (29)
1 (.75) 15 9/16 (395) 115 (52.3)
1/2 (.37) 17 7/8 (454) 75 (34)
1 (.75) 15 9/16 (395) 117 (53.2)
1 (.75) 22½ (572) 136 (61.8)
1 (.75) 25 (635) 161(73.2)
1/4 (.19) 14¼ 67 (30.5)
1/2 (.37) 14¼ 74 (33.6)
1/4 (.19) 14¼ 68 (31)
1/2 (.37) 14¼ 74 (33.6)
1/4 (.19) 17 7/8 79 (36)
1/2 (.37) 14¼ 74 (33.6)
1 (.75) 15 9/16 113 (51.4)
2 (1.50) 15 9/16 120 (54.5)
1/2 (.37) 17 7/8 85 (38.6)
1 (.75) 15 9/16 114 (51.8)
2 (1.50) 15 9/16 121 (55)
1 (.75) 22½ 134 (61)
2 (1.50) 22 13/16 136 (61.8)
1 (.75) 25 161 (73.2)
2 (1.50) 25 161 (73.2)

CM REPAIR/REPLACEMENT POLICY

All Columbus McKinnon (CM
inspected and performance tested prior to shipment. If any properly
maintained hoist develops a performance problem due to a material
or workmanship defect, as verified by CM
the unit will be made to the original purchaser without charge. This
repair/replacement policy applies only to Lodestar Hoists installed,
maintained and operated as outlined in this manual, and specifically
excludes parts subject to normal wear, abuse, improper installation,
improper or inadequate maintenance, hostile environmental effects
and unauthorized repairs/modifications.
We reserve the right to change materials or design if, in our opinion,
such changes will improve our product. Abuse, repair by an
unauthorized person, or use of non-CM replacement parts voids the
guarantee and could lead to dangerous operation. For full Terms
of Sale, see Sales Order Acknowledgement. Also, refer to the back
cover for Limitations of Warranties, Remedies and Damages, and
Indemnification and Safe Operation.
Maximum Lifting Speed
Capacity Model Per Min.
Ton (kg) Ft. (m)
Two Speed 230-3-60 or 460-3-60 or 220-3-50 or 380-3-50 or 415-3-50
1/8 (125) A-2 10/32 (3.1/9.8)
1/8 (125) AA-2 20/60 (6.1/18.3) ½ (.37)
**1/4 (250) B-2 5/16 (1.5/4.9)
1/4 (250) C-2 10/32 (3.1/9.8)
**1/2 (500) E-2 2.5/8 (.76/2.4)
1/2 (500) F-2 5/16 (1.5/4.9)
1/2 (500) J-2 10/32 (3.1/9.8)
1/2 (500) JJ-2 21/64 (6.4/19.5) 2 (1.50) 15 9/16 (395)
1 (1000) H-2 2.5/8 (.76/2.4)
1 (1000) L-2 5/16 (1.5/4.9)
1 (1000) LL-2 10/32 (3.1/9.8) 2 (1.50) 15 9/16 (395)
2 (2000) R-2 2.5/8 (.76/2.4)
2 (2000) RR-2 5/16 (1.5/4.9)
3 (3000) RT-2 1.75/5.5 (.53/1.68) 1 (.75)
3 (3000) RRT-2 3.5/11 (1.1/3.4) 2 (1.50)
B. Series 635 Low Headroom Trolleys
For Use
Capacity Adj. for STD S-Beams
with
Tons (kg)
Models
1/8 to 1 (125
A thru LL-2 4 thru 15 (102 thru 381) 3 1/8 (79.4)
to 1000)
2 (2000) R thru RR-2 6 thru 18 (152 thru 457) 4 3/4 (120.6)
3 (3000) RT thru RRT-2 8 thru 15 (203 thru 381)
C. Series 635 Motor Driven Trolleys
For Use
Capacity
with
Tons (kg)
Models
1/8 to 2 (125
A thru RR-2
to 2000)
RT thru
3 (3000)
RRT-2
5
(ENGLISH)
) Lodestar Electric Chain Hoists are
®
, repair or replacement of
®
Shortest
Motor
Distance Net Weight
H.P.
Between Hooks
(kW)
in. (mm)
¼ (.19) 14¼ (362) 69 (31.3)
14¼ (362) 76 (34.5)
¼ (.19) 14¼ (362) 70 (31.8)
½ (.37) 4¼ (362) 176 (34.5)
¼ (.19) 17 7/8 (454) 81 (36.8)
½ (.37) 14¼ (362) 76 (34.5)
1 (.75) 15 9/16 (395) 115 (52.3)
125 (56.3)
½ (.37) 17 7/8 (454) 87 (39.5)
1 (.75) 15 9/16 (395) 116 (52.7)
126 (57.3)
1 (.75) 22½ (572) 136 (61.8)
2 (1.50) 22 13/16 (579)
25 (635) 175 (79.5)
25 (635) 177 (80.5)
Tread Dia.
of Wheels
Depth In. (mm)
In. (mm)
4 (101.6)
*Travel Adj. for STD
Motor
Speed S-Beams
H.P.
FPM Depth In.
(kW)
(MPM) (mm)
6 thru 15
75 (23) ¼ (.19)
(152 thru 381)
6 thru 15
75 (23) ¼ (.19)
(152 thru 381)
P/N: 83874 (REV. 627-T) September 2016
lbs. (kg)
143 (65)
Min. Rad.
Curve In.
(mm)
24 (609)
24 (609)
30 (762)
Min. Rad.
Curve In.
(mm)
30 (762)
30 (762)