Closing Enabling Ensured ("Anti-Wind" Function) - Roger Technology AG/CTRL AGILIK Instrucciones Y Advertencias Para El Instalador

81 00

Closing enabling ensured ("anti-wind" function)

00
DISABLED (NOTE: par.
01
ENABLED
It is enabled when you want to make sure that the barrier does not remain open under unforeseen
circumstances; for example due to an unexpected activation of the step-by-step command moving away
from the gate while it was closing, or due to a strong wind blow that activates the anti-crushing protection,
the barrier would remain open waiting for a new command.
After a period of time set in parameter
A5
par. ) and then commands the start of the closing process.
The function will be enabled only if a STOP command was given (from the keyboard) or if the safety
edgeintervened and the value set in parameter
82 01
Waiting time to activate the ensured closure
01 90
SECONDS
-
02 99
from 2 to 9 MINUTES
-
90 00
Restoring the factory settings
After displaying number
rE S-
the message
the parameters numbers).
WARNING! After the restoration, make sure that the parameters are appropriate for the type of installation.
n0 01
Version HW
n1 23
Year of production
n2 45
Week of production
n3 67
n4 89
Serial Number:
n5 01
n6 23
Version FW
The serial number is obtained by combining the values of the parameters
table are indicated the values (next to the parameters, are not default values) from which is obtained the
01 23 45 67 89 01 23
serial number
o0 01
Performed operations
o1 23
The number of performed operations can be obtained by combining the values of the parameters
o1
and adding 2 zeros. For example in this table are indicated the values (next to the parameters, are not
default values) from which is obtained the the number of
82
will not be displayed)
82
90
, press the keys + and - at the same time for 4 seconds: on the display appears
blinking indicating that the standard factory settings were restores (indicated next to
the control unit starts a 5" pre-flashing (even if not enabled by
a2
was exceeded.
.
01 23 00
n0 n6
up to . For example in this
, that are 12300 operations.
o0
up to
37