Technical Specifications - Össur i - DIGITS Manual Del Usuario

The individual Grip Chips are programmed using the My i-Limb app and can be reprogrammed by the user at any
time.
CLEANING
Clean i-Digits wristband, digits, cover and electrode surface can only be cleaned with a soft damp cloth and mild
soap.
Clean the electrode surface regularly.
Do not use any strong chemicals.
NOTE: do not submerge the i-Digits, wristband, cover, electrode surface or charger in water.
Clean the cover with isopropyl alcohol once a week to help with disinfection.
MAINTENANCE
– Always turn off the i-Digits when not in use.
– Charge the battery after use.
– Ensure the i-Digits is serviced every 12 months.
– For all service or maintenance, contact your prosthetist.
TROUBLESHOOTING
Contact your clinician should any problems occur affecting the use of the i-Digits.

TECHNICAL SPECIFICATIONS

i-Digits
Voltage
Max. current
Battery capacity
Max device load
Finger carry load (static limit)
Time from full open to full close
Expected service life
Power Supply
Manufacturer
Model No.
Input
Output
7.4 V (nominal)
5 A
Rechargeable lithium polymer 7.4 V (nominal); 800 mAh capacity
20 kg
5 kg
0.8 seconds
5 years
XP Power
VEP36US12
100-240Vac, 50-60Hz, 0.9A Max
12VDC, 3A
9