SMA Sunny Tripower 8000TL Instrucciones Para La Sustitución página 22

7 Installing the DC Assembly
• The outer right cable must be in the cutout of the assembly.
• Only if the contact dome retainer has been attached recently, the 4 screws supplied
(circle) can be attached.
11. Tighten all the fastening screws supplied (TX20,
torque: 3.5 Nm).
12. Insert the ESS pin connector in the bracket and
attach using the clamping clip.
13. Lead all cables with the cable glands of the assembly of the EMC filtering device through the
enclosure openings to the string-fuse assembly.
14. Ensure that the cable glands are securely in place in the enclosure opening.
15. Connect all cables of the assembly of the EMC filtering device:
• Connect the cables to the string-fuse assembly
When doing so, ensure that the assignment is
correct.
• Insert the 8-pole plug onto the assembly of the
EMC filtering device.
16. Ensure that all cables are securely in place.
22 DCCON-STPTL10-RM-xx-10
SMA Solar Technology AG
Replacement Manual