ENGINE OIL LEVEL CHECK
Check the engine oil level with the generator on a level surface and
the engine stopped.
1. Loosen the maintenance cover screw and remove the maintenance
cover.
MAINTENANCE COVER SCREW
MAINTENANCE
COVER
2. Remove the oil filler cap and wipe the dipstick clean.
3. Check the oil level by inserting the dipstick into the oil filler neck
without screwing it in.
4. If the level is low, fill to the upper limit of the oil filler neck with the
recommended oil (see page 55).
5. Reinstall the oil filler cap securely.
6. Reinstall the maintenance cover and tighten the maintenance cover
screw securely.
OIL FILLER CAP
The Oil Alert system will automatically stop the engine before the oil
level falls below safe limits. However, to avoid the inconvenience of an
unexpected shutdown, check the oil level regularly.
SERVICING YOUR GENERATOR
OIL FILLER NECK
UPPER LIMIT
LOWER LIMIT
53