Starting The Engine - Honda EU22i Manual De Explicaciones

OPERATION

STARTING THE ENGINE

To prevent a possible fire, keep the generator at least 1 meter away from
building walls and other equipment during operation. Do not place
flammable objects close to the engine.
• Operating this generator less than 1 meter from a building or other
obstruction can cause overheating and damage the generator.
• For proper cooling, allow at least 1 meter of empty space above and
around the generator.
Keep all cooling holes open and clear of debris, mud, water, etc.
Cooling holes are located on the side panel, the control panel, and
the bottom of the generator. If the cooling holes are blocked, the
generator may overheat and damage the engine, inverter, or
windings.
SAFE OPERATING PRECAUTIONS
Refer to
IS YOUR GENERATOR READY TO GO?
AC OPERATION
Refer to the
(see page 36) or
the generator.
1. Make sure that all appliances are disconnected from the AC receptacle.
2. Turn the fuel filler cap vent lever to the ON position.
FUEL FILLER CAP VENT LEVER
28
(see page 33),
DC OPERATION
on page 27 and perform the
checks (see page 25).
AC PARALLEL OPERATION
(see page 42) for connecting loads to
ON
ON