Engine Oil Change - Honda EU22i Manual De Explicaciones

SERVICING YOUR GENERATOR

ENGINE OIL CHANGE

Drain the oil while the engine is warm to assure rapid and complete
draining.
1. Turn the engine switch and fuel filler cap vent lever to the OFF
position (see page 31) to reduce the possibility of fuel leakage.
2. Loosen the maintenance cover screw and remove the maintenance
cover (see page 53).
3. Place a suitable container next to the engine to catch the used oil.
4. Remove the oil filler cap, and drain the oil into the container by
tipping the engine toward the oil filler neck.
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of the used oil properly.
Put it in a sealed container, and take it to a recycling center. Do not
discard it in a trash bin, dump it on the ground, or pour it down the
drain.
5. With the engine in a level position, fill with the recommended oil
(see page 55) to the upper limit of the oil filler neck.
Maximum oil capacity: 0.44 L
6. Reinstall the oil filler cap securely.
7. Reinstall the maintenance cover and tighten the maintenance cover
screw securely.
Wash your hands with soap and water after handling used oil.
OIL FILLER NECK
54
UPPER LIMIT
LOWER LIMIT