Installation Steps; Care And Cleaning - AVS Bugflector Instrucciones De Instalación

Installation Steps

Remove (2) fasteners which attach rubber trim to hood.
3
Install (2) screws with washers in the outboard mounting holes.
5
Do not overtighten
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from drawings.
hood
rubber trim
hood shield
washer
screw
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Align Hood Shield with holes in hood. The mounting flange of the hood
shield is positioned OVER the rubber trim.
4
Install (2) plastic fastners in the inboard mounting holes.
6
8
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
hood
rubber trim
hood shield
fastener
Do not overtighten
Install (4) bump ons.
X4