Installation Steps; Care And Cleaning - AVS Bugflector Instrucciones De Instalación

Installation Steps

Peel back 2" (5 cm) of tape liner from each end of
bottom flange.
3
Remove remaining tape liner by pulling on exposed
ends. Apply pressure to outboard flanges to ensure tape
adhesion.
5
Close hood.
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from drawings.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30046
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2012 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Align hood shield with chrome hood trim.
4
Adjust bumper stops as needed to ensure hood shield
clears grille and headlights.
6
8
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
Install (4) bump ons.