Miltenyi Biotec gentleMACS Manual Del Usuario página 63

The program will immediately start, and the status of the tube position will change to Running.
9. On completion of the program, the status of the tube position will change to Done. The progress bar and
timer display the elapsed time since completion of the program.
Note: For further processing, use the Clear button to reset the position from the Done status into the Selected
status to assign a new program.
10. Remove the tube from the tube position. The status of the tube position will change to Free.
Running multiple samples simultaneously
Up to eight samples can be run simultaneously using the same or different programs. In this example, eight
samples will be processed using the same program.
Note: Do not switch off the instrument while running a program to avoid severe damage of the instrument!
1. Attach the tubes upside down to the Sleeves of the free tube positions. The status of the tube positions will
change from Free to Selected.
2. To select a dissociation program, press the Folder icon to select the required folder. The list of gentleMACS™
Programs in the respective folder will be displayed.
4
61