Miltenyi Biotec gentleMACS Manual Del Usuario página 69

Figure 4.8: New_program file template to create user-defined program.
5. Enter respective values and press OK.
6. Press Add to insert the next command or Save to name and store the program.
Example of an user-defined program
1. ramp 2,000 rpm, 10''
2. loop 3×
3. spin –2,000 rpm, 10''
4. spin 2,000 rpm, 10''
5. end loop
6. temp ON
7. spin –20 rpm, 30'
8. spin 3,000 rpm, 10''
9. temp OFF
10. end
Figure 4.9: Graph of the example user-defined program.
Note: It is possible to insert or edit a command at any step above the end command. A new command will be
inserted above a highlighted command. Commands can be highlighted using the touchscreen or the scroll
buttons.
Note: Highlighted commands, except for the end command, can be deleted by pressing Delete .
1. Press spin. Enter all parameters for the selected command using the pop-up keypad. Enter speed (rpm) and
time (min and sec).
4
67