Safety Symbols; Safety Label - Miltenyi Biotec gentleMACS Manual Del Usuario

Safety symbols

The following symbols are used to highlight conditions that could cause injury to personnel.
Safety alert. Risk of danger. The documentation needs to be consulted in all cases where this safety alert
symbol is used on the instrument, in order to find out the nature of the potential hazard and any actions that
have to be taken.
Biohazard. Risk of contamination if potentially dangerous biological material is used.
Risk of electric shock.
Hazardous optical radiation.
Risk of unmeant trapping of finger by hazardous rotating part.
Hazardous hot surface.
Noise hazard.
Protective conductor terminal. Symbol is attached on the inside of the instrument. Information for service
personnel.
Fuse.
WEEE (Waste of Electrical and Electronic Equipment).
On (Power supply).
Off (Power supply).
All operating instructions must be read before installing and operating the instrument.

Safety label

The following safety label is attached to the back of the instrument and plays an important part in maintaining
safety.
6
WARNING! Avoid serious injury. Read and understand operating instructions
before installing or use. If manual is missing, obtain replacement from
Miltenyi Biotec.