Miltenyi Biotec gentleMACS Manual Del Usuario página 66

5. While Sample A is still running, insert Sample B into a free position, attach a gentleMACS™ Heater to the
selected position as described in section 4.4.2.1 and select the program 37°C_m_tumor_01 as described in
steps 2 and 3.
6. Press OK and Start to commence processing of Sample B.
4
7. While Sample A and Sample B are running, insert Sample C into the next free position and select the program
C_01 from the Templates folder. Press OK and Start to commence processing of Sample C.
8. Remove the samples when the status of the tube positions changes to Done. In this example, Sample A and
Sample C can be removed while Sample B is still running.
64