Specifications - GERATHERM oxy control Instrucciones De Uso

SPECIFICATIONS

1.
Model-Nummer:
GT-300C203
2. Anzeigetyp:
1-colored OLED-display
3. SpO :
2
Display range: 0% to 99%
Measuring range: 70% to 99%
Accuracy: 70% to 99%: ±2%; 0% to 69% no definition
Resolution: 1%
4. Pulse Rate:
Display range: 0 bpm to 254 bpm
Measuring range: 30 bpm to 235 bpm
Accuracy: 30bpm to 99bpm, ±2bpm; 100bpm to 235bpm, ±2%
Resolution: 1BPM
5.
RED
IR
NOTE: The information about wavelength range can be es-
pecially useful to doctors.
EN
6.
Power Requirement:
Two AAA 1.5V, 600mAh alkaline batteries
Power consumption: Less than 30mA
Battery status indicator:
Alkaline batteries could be continuously operated as long
as 30 hours
7. IP Classification:
IPX1 (Protection against vertically falling drops of water)
8.
Dimensions:
Length: 58 mm; Width: 32 mm; Height: 34 mm
Weight: 50g (including 2 Batteries)
9.
Environmental Requirements:
Operation Temperature:
Storage Temperature:
Ambient Humidity:
Atmosphere pressure:
10. quality Guarantee: Geratherm Medical AG is certified
according to DIN EN ISO 13485 and complies with
Council Directive 93/42/EEC. This entitled to affix
the . 0197 marking (Notified body: TÜV Rheinland
LGA Products GmbH). The puls oximeter conforms to:
DIN EN ISO 80601-2-61:2012-01 - Medical electrical
equipment - Part 2-61: Particular requirements for basic
safety and essential performance of pulse oximeter
equipment ISO 80601-2-61:2011).
Wavelength Radiant Power
660±2nm 1.8mW
940±10nm 2.0mW
+5 bis +40 °C
-20 bis +55 °C
≤ 80 % in use
≤ 93 % during storage
86 kPa bis 106 kPa
20