Tabla de contenido
Publicidad
Aplicación MIDI
Model:
JX-305 (groovesynth)
Date:
Mar. 6, 1998
Version:
1.00
Symbol
Description
Range
n
MIDI Channel
0H–6H,9H (ch.1–ch.7,ch.10)
vv
Control value
00H–7FH (0–127)
kk
Note Number
00H–7FH (0–127)
xx
ON/OFF
00H–3FH (0–63:OFF), 40H–7FH (64–127:ON)
1. Data reception (sound source section)
Channel voice messages
Note Off
status
2nd byte
3rd byte
8nH
kkH
vvH
9nH
kkH
00H
* Not received when the Rx Switch paramete is OFF.
* Not received by the Rhythm Part when the Envelope Mode parameter is NO-SUS.
* If the Remote Keyboard Switch is ON, the message will have the same effect as when a
note is released on the JX-305's keyboard. This means that you can control the
arpeggiator and RPS from an external MIDI keyboard.
Note On
status
2nd byte
3rd byte
9nH
kkH
vvH
vv=Note On velocity:
01H - 7FH (1 - 127)
* Not received when the Rx Switch paramete is OFF.
* If the Remote Keyboard Switch is ON, the message will have the same effect as when a
note is played on the JX-305's keyboard. This means that you can control the
arpeggiator and RPS from an external MIDI keyboard.
Polyphonic Aftertouch
status
2nd byte
3rd byte
AnH
kkH
vvH
* Not received when the Rx Switch parameter is OFF.
* The effect will apply according to the Aftertouch Control setting.
Control Change
* Not received when the Rx Switch parameter is OFF.
Bank Select (Controller number 0,32)
status
2nd byte
3rd byte
BnH
00H
mmH
BnH
20H
llH
mm,ll=Bank number:
00 00H–7F 7FH (bank.1–bank.16384)
* Not received when the Rx Program Change Switch or Rx Bank Select Switch parameter
is OFF.
* The Patches corresponding to each Bank Select are as follows.
Bank Select | Program No | Group
MSB | LSB |
|
——————+—————+————————————+————————————————————————————————————————
81
|
0 |
1 -
64 | Preset A
81
|
0 |
65 - 128 | Preset B
81
|
1 |
1 -
64 | Preset C
81
|
1 |
65 - 128 | Preset D
81
|
2 |
1 -
64 | Preset E
81
|
2 |
65 - 128 | Preset F
81
|
3 |
1 -
64 | Preset G
81
|
3 |
65 - 128 | Preset H
82
|
0 |
1 -
64 | Preset I
82
|
0 |
65 - 128 | Preset J
——————+—————+————————————+————————————————————————————————————————
85
|
0 |
1 -
64 | User A
85
|
0 |
65 - 128 | User B
85
|
1 |
1 -
64 | User C
85
|
1 |
65 - 128 | User D
——————+—————+————————————+————————————————————————————————————————
86
|
0 |
1 -
64 | Card A
86
|
0 |
65 - 128 | Card B
86
|
1 |
1 -
64 | Card C
86
|
1 |
65 - 128 | Card D
86
|
2 |
1 -
64 | Card E
86
|
2 |
65 - 128 | Card F
86
|
3 |
1 -
64 | Card G
86
|
3 |
65 - 128 | Card H
236
* The Rhythm set corresponding to each Bank Select are as follows.
Bank Select | Program No | Group
MSB | LSB |
——————+—————+————————————+————————————————————————————————————————
81
|
0 |
82
|
0 |
——————+—————+————————————+————————————————————————————————————————
85
|
0 |
——————+—————+————————————+————————————————————————————————————————
86
|
0 |
Modulation (Controller number 1)
status
2nd byte
BnH
01H
* The effect will apply according to the Modulation Control setting.
Portamento Time (Controller number 5)
status
2nd byte
BnH
05H
* The Portamento Time parameter will change.
Data Entry (Controller number 6,38)
status
2nd byte
BnH
06H
BnH
26H
mm,ll= the value of the parameter specified by RPN mm=MSB, ll=LSB
Volume (Controller number 7)
status
2nd byte
BnH
07H
* Volume messages are used to adjust the volume balance of each part.
Panpot (Controller number 10)
status
2nd byte
BnH
0AH
* Adjust the stereo location over 128 steps, where 0 is far left, 64 is center, and 127 is far
right.
Expression (Controller number 11)
status
2nd byte
BnH
0BH
* Expression messages are used to adjust the volume of each part.
General purpose Controller1 (Controller number 16)
status
2nd byte
BnH
10H
* The LFO1 Rate parameter will change.
General purpose Controller3 (Controller number 18)
status
2nd byte
BnH
12H
* The LFO1 Pitch Depth parameter will change.
General purpose Controller4 (Controller number 19)
status
2nd byte
BnH
13H
* The LFO1 Filter Depth parameter will change relatively.
Patch No.
11 - 88
Hold 1 (Controller number 64)
11 - 88
status
2nd byte
11 - 88
11 - 88
BnH
40H
11 - 88
11 - 88
11 - 88
* If the Remote Keyboard Switch is ON, it will be possible to control the Hold function
11 - 88
of the arpeggiator.
11 - 88
11 - 88
Portamento (Controller number 65)
11 - 88
11 - 88
status
2nd byte
11 - 88
BnH
41H
11 - 88
11 - 88
* The Portamento Switch Parameter will change.
11 - 88
11 - 88
11 - 88
11 - 88
Sostenuto (Controller number 66)
11 - 88
status
2nd byte
11 - 88
11 - 88
BnH
42H
|
1 - 26
| Preset A
1 -
6
| Preset B
1 - 20
| User A
1 - 20
| Card A
3rd byte
vvH
3rd byte
vvH
3rd byte
mmH
llH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
vvH
3rd byte
xxH
3rd byte
xxH
3rd byte
xxH
Patch No.
11 - 42
11 - 16
11 - 34
11 - 34
Publicidad
Tabla de contenido
