Roland JX-305 Manual Del Usuario página 242

3.2 Messages not recorded during
recording
Channel Mode messages
Local On/Off (Controller number 122)
status 2nd byte 3rd byte
BnH 7AH 00H
vv=value: 00H,7FH (Local off, Local on)
All Note Off (Controller number 123)
status 2nd byte 3rd byte
BnH 7BH 00H
* When an All Note Off message is received, all notes of the corresponding channel that
are on will be sent Note Off's, and the resulting Note Off messages will be recorded.
3.3 Messages acknowledged for
synchronization
System Common messages
Song Position Pointer
status 2nd byte 3rd byte
F2H mmH llH
mm,ll=value: 00 00H–7F 7FH (0–16383)
System Realtime messages
Timing Clock
status
F8H
* This message will be received if the Sync Mode parameter is SLAVE.
Start
status
FAH
* This message will be received if the Sync Mode parameter is SLAVE or REMOTE.
Continue
status
FBH
* This message will be received if the Sync Mode parameter is SLAVE or REMOTE.
Stop
status
FCH
* This message will be received if the Sync Mode parameter is SLAVE or REMOTE.
242
4. Data transmission (Sequencer section)
4.1 Recorded messages are transmitted during
playback.
4.2 If the Through parameter is ON, messages
received (except for System Common messages
and System Realtime messages) will be
transmitted.
4.3 Messages that are generated and transmitted
4.3.1 Messages automatically generated by the
system
Channel Mode messages
Omni Off (Controller number 124)
status 2nd byte 3rd byte
BnH 7CH 00H
* At start-up, this message is transmitted to all channels.
Poly (Controller number 127)
status 2nd byte 3rd byte
BnH 7FH 00H
* At start-up, this message is transmitted to all channels.
4.3.2 Messages generated and transmitted when
the Sync Out is ON
System Common messages
Song Position Pointer
status 2nd byte 3rd byte
F2H mmH llH
mm,ll=value: 00 00H–7F 7FH (0–16383)
System Realtime messages
Timing Clock
status
F8H
Start
status
FAH
Continue
status
FBH
Stop
status
FCH