10
15. Install the kit supplied WIN antenna module to the
white WIN antenna mounting bracket supplied in the
kit.
16. The control module will locate behind and to the left
side of the glove box opening.
17. Position the WIN antenna module (3) to IP mounting
pins (2). The module snaps on.
18. Route the WIN antenna module connector (1) and it's
coax cable (2) through the openings in the instrument
panel towards the WIN module.
19. Once successfully routed, secure the cable tie wraps
(3) and (4) to instrument panel.
20. Install the glove box.
Oct 19, 2009
K6860909