Mopar 82212148 Manual Del Usuario página 6

6
21. Install the rear cover to the connector, make sure the
retaining tabs (1) lock into place.
22. Install and connect the connector marked "II" (1).
23. Position the IPM over the three bracket tabs (2) and
apply downward pressure until the retaining clips snap
into place securely.
24. Install the battery positive cable (3) to the IPM B+ ter­
minal stud.
25. Install the nut (2) to the IPM B+ terminal stud. Tighten
the nut to 11.5 N∙m (105 in. lbs.).
26. Close the IPM cover ensuring the locking tabs snap
firmly in place.
Oct 19, 2009 K6860909