Publicidad
Idiomas disponibles
Idiomas disponibles
8
4. Using a trim stick or equivalent, separate the upper
clips. and rotate the cover down and release the lower
hinges at the bottom and remove the opening cover.
5. Rotate the cover down to carpet and grasp part at its
lower edge and pull up and rearward to snap off the
lower hinge pins.
6. Using a trim stick or equivalent, carefully pry the bezel
around the ignition switch until it unsnaps from the in
strument panel.
7. Remove the four screws (3) that secure the Wireless
Ignition Node (WIN) (2) to the instrument panel sup
port structure (1).
8. Disconnect the instrument panel wire harness
connector from the WIN connector receptacle.
9. Remove the WIN (2) from the instrument panel.
Oct 19, 2009
K6860909
Publicidad
