Gastro-M MAESTRO Manual De Instrucciones De Operación página 36

PROBLEM
Boiler heating operates,
but LED does not turn on
Dispenser heating does
not operate
o
The 85 C thermal fuse is
faulty. The dispenser's
fuse is burned out
Dispenser's heating
operates, but LED does
not turn on
Pump motor does not
operate
Motor operates, but
pump does not rotate
Items do not dry (dishes,
glasses, etc.)
www.info@saro.de
CAUSE
Faulty LED
Switch N1 of the
appliance or main switch
or fuse has not been
activated
Boiler heating is open
The thermostat switch of
o
60 C heating is faulty
'Compartment heating'
relay is faulty
Faulty LED
Main switch or fuse is not
activated.
The door is not closed
Main relay is faulty
Pump motor is faulty
Program selection
switch is faulty
An object has jammed
the pump fin
Salts or detergent have
been petrified following
non-operation of the
appliance
Compartment has no
drying aid
36 34
SOLUTION
Change LED
Activate the
corresponding switch
or fuse
Wait
Refer to the authorized
local dealer who sold the
appliance or directly to
the manufacturer
Change LED
Activate main switch or
fuse
Close the door
Refer to the authorized
local Dealer who sold
the appliance or directly
to the manufacturer
Refer to the authorized
local dealer.... (As above)
Rotate the screw on the
backside of the motor,
until it rotates freely
Insert drying aid to the
compartment