Stopping; Working Irregularities; Food Stains And Hardened Residues - Sagi XE70 Instrucciones Originales - Manual De Uso E Instalación

Press this key
appliance to the stand-by mode.
WARNING: the main switch
insulate the machine from the electric current.
Set the general cut-out in OFF position.
To insulate the refrigerator from the electric current, remove the plug
from the socket.
In case of working irregularities, before to call the technical service in zone verify that:
− the control board is turned on and the current is present;
− the regulated temperature is the wished one;
− the doors are perfectly closed;
− the machine is not near heat sources;
− the condenser is clean and the fan works regularly;
− an excess of hoarfrost does not cover the evaporating pannel.
In case of negative result, contact the nearest service centre indicating the model (1) and
the serial number (5) shown on the rating placed on the appliance instrument panel.

FOOD STAINS AND HARDENED RESIDUES

In case there are food or waste stains in the fridge, wash the surfaces with water and
clean them off before they might harden.
If the wastes have already hardened, please follow the instructions
hereunder:
1. Use a soft sponge drenched with lukewarm water and neutral
detergent (you can use the detergents for the daily cleaning
operations, at the highest concentration estimated by the label).
for 3 seconds and release it as the display shows the [Sby] to set the

WORKING IRREGULARITIES

STOPPING

32
DOES NOT