Inverting The Door - Sagi XE70 Instrucciones Originales - Manual De Uso E Instalación

• the model and the serial number that can be found on the technical feature plate,
placed under the appliance instrument panel.
Refrigerator cabinets are normally supplied with opening to the right.
To invert the door (hinge on the left side) follow this procedure:
• Undo the screw "F" under the dashboard.
• Unhook the dashboard, pulling it forward
In model. "Ice cream – Pastry & Bakery" rotate the instrument panel on the side heads
by removing the "F" screw.
• Remove the two fixing screws of the bracket "A" and the holding screw of the hinge "B".
• Extract the door, remove the hinge "B" and the component "e" and invert their position.
• Remove the lower bracket "d" and install it in its housing on the opposite side.
• Place the door by introducing the hole of the lower component "E" into the pin of the
bracket "D".
• Fix the bracket "A" to the structure on the opposite side by tightening the fixing screws.
• Before tightening the bracket screws, check the hinge height (12 mm approx.) and the
door perpendicular position with respect to the structure.
• Replace the instrument panel.
NOTE: Keep the door closed when removing and installing the brackets.

INVERTING THE DOOR

35