Descargar Imprimir esta página

BULL'S DartForce Manual De Instrucciones página 23

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
Electronic Dartboard
23/158
2. Mounting with adapter
Choose a location to hang the dartboard where is about 10 feet (3.048 m) of open space in front
of the board. The "toe-line" should be 7'9 1/4" (2.37 M) from the face of the dartboard. Since
this dartboard is powered by an AC adapter, you have to mount close to an electronic outlet for
convenience. No matter the dartboard has horizontal or vertical hang hole(s), the center of
bullseye should be 5'8" (1.73 m) from the ground. Mark the center location on the wall.
Measure the distance between hang hole(s)
and center. Then, make the mark(s) for
hang hole(s). Make sure the second mark
for hang hole is level with the first mark.
Mount the dartboard on the wall by lining
up the hang holes on the back with the
screws. It may be necessary to adjust the
screws until the board fits snugly against
the wall. If you want to mount the
dartboard even more securely to the wall,
you can fasten four screws through the
holes located in the catch ring area (the
area outside the scoring segments)
3. Dartboard Functions
POWER switch/button - Be sure the AC Adapter is plugged into the jack. Press the POWER
switch to turn game on or off.
START/HOLD button - This multi-function button is used to:
• START the game when all options have been selected.
• Put dartboard in HOLD status between rounds to allow player to remove darts from the
target area.
RESET button – Press to clear display and reset dartboard to opening sound.
GAME GUARD button –After the START button has been pressed and play has begun, the
GAME GUARD feature can be activated. When the button is pressed, all of the keys will
'lock'. When GAME GUARD is active, a misguided dart hitting a button will not affecting
your game. To deactivate the GAME GUARD, simply press the button again and the keys will
unlock.
BOUNCE OUT button - Decide before play if you want to count darts that do not remain in
board ("bounce-outs") or not. If not, simply press the BOUNCE OUT button immediately after
a bounce out occurs to deduct the score that registers
DART-OUT/SCORE button - The DART-OUT feature is active only during the "01" games
(301, 401, etc.). When a player's score falls below 160, he/she can press the DART OUT
button to get a suggestion from the dartboard as to the 3 darts needed to finish the game. Note:
doubles and triples are indicated with 2 and 3 dashes to the left of the number respectively. The
SCORE feature allows player to access score not current on display.
GAME button – Press to page through the on-screen game menu and select game.

Publicidad

loading

Productos relacionados para BULL'S DartForce

Este manual también es adecuado para:

Dartforce