Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Intended Use :

This handpiece is designed only for dental treatment use.
CAUTION
· When operating the handpiece always consider the safety of the patient.
· Do not attempt to disassemble the handpiece nor tamper with the mechanism.
· Check for vibration, noise and overheating outside the patient's mouth. If any abnormalities are found do not operate. Contact authorized dealer for service.
· Should the handpiece not function normally, cease operation immediately and return the handpiece to your authorised NSK Dealer for service.
· Depressing the chuck push button system while the bur is rotating could result in OVERHEATING of the handpiece head. Caution must be exercised during use to keep
cheek tissue away from the chuck push button system. Contact with soft tissue may cause the push button to depress and burn injury to the patient may occur.
· Avoid impact on the handpiece. Do not drop the handpiece.
· Remove the bur only after the handpiece has completely stopped rotating.
· Do not use long surgical burs. Do not use burs longer than 26mm.
· This product is classified as Class 1 LED Product. (M500WLED, M500BLED, M600WLED, M600BLED)
· Do not fixate the eyes of LED light. ( M500WLED, M500BLED, M600WLED, M600BLED )
· If any abnormalities ( dark, do not light on or flashing ) are found for LED, stop using the product immediately and contact authorized dealer. ( M500WLED,
M500BLED, M600WLED, M600BLED )
· Use the power source with the supply capability of 15W or less for LED lighting.
· Use a power source which meets the following requirements. ( M500WLED, M500BLED, M600WLED, M600BLED )
1. The electricity supply of the power source is below 15W both under normal and single failure conditions.
1

Publicidad

Tabla de contenido
loading

Tabla de contenido