Pump status indicator
A
Colour display
B
Door
C
.
r
Pump rotor
D
Charger plug
E
Occlusion IN sensor
F
Drip chamber
S
5.
USER INTERFACE
5.1.
BUTTONS
1
Home button
2
Snooze button
Information button
3
Start/pause button
4
5.1.1.
Home button
The HOME [
] button navigates back to the home screen or dashboard, in 1 touch from whichever screen you are in.
Additionally, the HOME [
Note: the HOME [
5.1.2.
Snooze button
The alarm SNOOZE [
This gives you the opportunity to investigate and addresses the indicated alarm without being distracted by the audio alarm signal.
Note: the alarm remains visible. The
5.1.3.
Information button
The INFORMATION [
Examples:
5.1.4.
Start/pause button
The START/PAUSE [
5.1.5.
Fill set button
The FILL SET
button primes the Flocare Infinity giving set to ensure that air within the system has been purged.
5.1.6.
Settings button
The SETTINGS
See chapter 7.4 'Settings menu' for full button functionality.
5.1.7.
Therapy button
With the THERAPY [
See also chapter 7.4.1 'Reset patient data
ZMNL900901_DE.indb 7
ZMNL900901_DE.indb 7
] button acknowledges an alarm or warning.
] button does not act as a back button to move one level up in a menu.
] button silences the audio alarm signal for 2 minutes when the pump is in an alarm state.
symbol on the display indicates that the alarm sound is snoozed.
] button (i-button) provides help and additional information about the actual pump state at any given time.
•
In a running mode, the information button provides information about the status of the therapy.
•
In pause mode, the information button will give recommendations how to program a therapy depending on your selected therapy.
•
In an alarm state, the information button [
solutions.
] button starts or pauses a programmed therapy.
button provides access to the pump settings.
] button, you can select your desired therapy.
Air sensor
G
Occlusion OUT sensor
H
AC power plug
I
AC power socket
J
AC charging light
K
Speaker
L
5
Fill set button
6
Settings button
Therapy button
7
SOFT button 1
8
] provides recommendations on how to solve the indicated alarm by providing potential
‒ 7 ‒
Pole clamp interface
M
Pole clamp
N
ENPlus
connector
®
O
ENFit
connector
®
P
Medication port
Q
Cassette
R
SOFT button 2
9
SOFT button 3
10
ON/OFF button
11
15.07.21 10:12
15.07.21 10:12