ARIETE 180 Manual De Instrucciones página 21

SETTING THE MACHINE OUT OF SERVICE
necessary to provide for the separation of the various materials used in the construction of the machine and
dispose of them according to their composition and the provisions of law in force in the country of use.
TROUBLESHOOTING
Warning!
In case of dysfunctions, immediately turn off the appliance and unplug the power cord from the outlet.
The appliance does The power cord is not plugged
not work in
The heating protection of the
appliance has been activated.
The metal guard is not properly
inserted.
The electrical heating element
beats against the metal guard
The water circulation Scarce water into the cooking
pump creates a pot.
The water circulation The pump is taking air in.
pump creates water Scarce water into the cooking
bubbles pot.
pot.
The water into the cooking pot
indicated on the metal guard
The sensor is uncovered due to
the water movement generated
by the circulation pump
Short-circuited appliance
The appliance The heating element does not
cannot heat water up work
Plug the power cord into the outlet
the cooking pot and the metal guard. Install
the metal guard as indicated in the paragraph
Try moving water by using a spoon.
Try moving water by using a spoon. Add water
level indicated on the metal guard
Contact the Assistance Centre.
Contact the Assistance Centre.
21