USING FAN WITHOUT LIGHT KIT (OPTIONAL)
3.
The pull chain extension (J) supplied in one of the
hardware packs or custom pull chain extension (not
included) may be attached to fan. (Fig. 3)
OPERATION INSTRUCTIONS
1.
The pull chain on the switch housing plate, which is
inside the light kit fitter (E), has four positions to
control fan speed. One pull is HIGH, two is MEDIUM,
three is LOW and four turns the fan OFF. (Fig. 1)
2. The pull chain in the center is used to turn the lights
ON or OFF. (Fig. 2)
3
J
1
2
15
E