Carlson Pet Products 0930 Manual Del Propietário página 5

ENGLISH
Next, tighten the top 2 Adjustment Wheels by turning them counter-clockwise.
Again, make sure both sides are equal as you tighten. As you tighten the Adjustment
wheels you will notice the gap between the plastic gate door latch and the frame
tube is narrowing. As the gap continues to narrow continue turning the upper
Adjustment Wheels until the frame tube engages in the slot in the plastic gate door
handle. Leave a 1/16" gap between the frame tube and the plastic gate door latch as
shown in Diagram F. IMPORTANT: The frame tube MUST NOT touch the Plastic gate
door latch. If it does touch you have turned the Adjustment Wheels a few too many
turns. To correct this simply turn the upper Adjustment wheels clockwise a few turns
until you have a 1/16 inch gap. Your gate is now ready to use.
Diagram F
1/16"
Threaded Spindle Rod
Flat Plastic End
Adjustment Wheel
Frame Tube
7
Diagram G1:
How to open the Gate Door.
Step 1
Diagram G1
Step 1:
Slide the Safety Lock back.
Step 2:
You can now lift up the Handle.
Step 3:
The Gate Door can now swing open.
Diagram H1
TO OPEN
the small pet door, pull knob out and swing the door open.
ENGLISH
Step 2
Step 3
8