Cleaning The Suction Fi Lter; Cleaning The Detergent Solution (Or Washing Water) Fi Lter - NSS CHAMP 2417 RB Manual De Uso

Cleaning the suction fi lter

• Remove the vacuum motor (see procedure in the specifi c section).
• Remove the suction fi lter (A) from the mount (B).
• Clean the suction fi lter with a brush and compressed air (max. 5 Bar). Replace the fi lter if worn out.
!
ATTENTION!
Adequately protect body parts (eyes, hair, hands, etc.) when cleaning with compressed air or water guns.
• Assemble the parts, following the disassembly operations in reverse order.

Cleaning the detergent solution (or washing water) fi lter

• Use the machine controls to lower the squeegee and the disc brushes, then turn the ignition key to "0" and
remove it.
• Operate on the right side of the machine to unscrew and remove the transparent cover with fi lter (D).
• Remove the fi lter (E) from the transparent cover (F).
• Clean the fi lter (E) and the transparent cover (F).
• Replace the fi lter (E) in its transparent cover case (F).
• Screw the transparent cover with fi lter (D) in its seat.
• Rotate the ignition key to "I" and wait for the squeegee and the disc brushes to lift, then rotate the ignition key
to "0" and remove it.
B
A
D
F
E
35
D