Daily Cleaning; Cleaning For Prolonged Deactivation; Cleaning For Replacing Lava Stones - MBM GPL498 Instrucciones Para El Funcionamiento

Barbacoa de piedra volcánica
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 52
4.
ROUTINE MAINTENANCE

Daily cleaning

Wait for the temperature of the hotplate to cool off so that the operator is not burnt.
Do not use pressurised or direct water jets.
1- Lift the cooking plates, and using a non-abrasive sponge, clean the entire surface
thoroughly with soapy lukewarm water.
2- Rinse the parts and carefully dry all the surfaces using non-abrasive material;
3- Remove the burnt oil collection container, empty it and wash it. Afterwards dry it
thoroughly and put it back in place.
4- If necessary, open the doors and check the ash collection container. If needed empty
it and reposition it after having carefully washed and dried it.
5- Carefully reposition all of the parts removed in their housing, making sure not to invert
the assembly sequence.
If necessary, repeat the operations described above for a new cleaning cycle.
CHROMED HOTPLATES: Use a resistant plastic scraper to remove incrustations. Clean
the hotplate with a moist cloth. Turn the appliance on to dry it (See Daily activation). When
the operations described are finished, lubricate it with a light coating of Vaseline.

Cleaning for prolonged deactivation

In the event of prolonged inactivity, carry out the procedure described in daily cleaning
and protect the parts more exposed to oxidation as described hereafter.
Therefore:
Wipe a non-abrasive cloth lightly soaked with food-safe Vaseline oil over all of the
stainless steel surfaces in order to create a protective film.
Air out the appliances and rooms regularly.

Cleaning for replacing lava stones

When replacing the lava stones due to wear, you must:
Wait for the temperature of the hotplate to cool off so that the operator is not burnt.
Carry out the procedure described in daily cleaning at points 1-2-3.
Removed the worn stones (Fig. 6 Detail B). Clean the housing of the stones.
Insert the new stones into the specific housing.
Carry out the procedure described in daily cleaning at points 4-5.
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 13 -
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gpl998Gpl408Gpl908Gpla498Gpla998

Tabla de contenido