Publicidad
Idiomas disponibles
Idiomas disponibles
CO N F I GU R E T H E CUPRA CHA RGER CO NNE CT
A ND CU P R A CH AR GER PR O LO CALLY.
NOTE
For further information about the configuration,
refer to the online manual at www.zww.eco/
download.
Precondition: The wallbox is installed and you
have the configuration sticker which is supplied
with the charging station.
1. If the input power to the wallbox is on, have
it switched off at the power supply cabinet.
Then have the input power switched on again.
2. The LED indicating the wallbox's state shows
solid blue and the Configuration Manager
is accessible.
3. Stand close to the wallbox with your
mobile device.
4. Connect to the Wi-Fi Hotspot listed
on the sticker.
5. Open any internet browser on your mobile
device and enter the IP-Address for the
Configuration Page: 192.168.123.4
6. Use the Configuration Page Password shown
on the sticker to log in to the Configuration
Manager.
7. Configure the settings of the wallbox
according to your requirements:
a. Establish an internet connection for the wallbox,
e.g by setting access parameters to your home
Wi-Fi or local area network (LAN).
b. Set your personal preferences, for example:
language, log-in password, use of charge cards
for access control.
PAIR CUPRA C H ARG ER CONNECT
AND C UPRA C HARG ER PRO TO
CUPRA ACCOUNT.
To use all online services offered by the CUPRA
Charger Connect and CUPRA Charger Pro, you
must link your wallbox to your CUPRA account.
1. Download the CUPRA Charger App.
2. Create an account or log in.
3. Follow the steps shown in the App.
3 9
Publicidad
