Error States Of The Wallbox - Cupra CHARGER Manual De Instrucciones

TROUBLESHOOTING.
Refer to Status indication for the description
of the LED indications of the wallbox.
DANGER
Operating damaged electric devices will result in the risk of electric shock,
which will cause severe injury or death.
• Troubleshooting must only be done by a qualified electrician unless
otherwise stated.
WARNING
Ignoring an error indicated on the wallbox may result in the risk of electric
shock, which can cause injury or death.
• If any of the listed errors persists, get in contact with your customer
support at cupra-support@elli.eco to get further advice and to avoid
damage to your wallbox.

ERROR STATES OF THE WALLBOX

LED states Wallbox status
Energy saving
Off
HMI Cable
not connected
Explanation
Charging possible
• Connect the wallbox to the vehicle to start the wallbox.
Charging not possible
• Check that the power supply to the wallbox is switched
on at the power supply cabinet.
Charging not possible
• Have the HMI cable checked for a proper connection.
4 1