Publicidad
Idiomas disponibles
Idiomas disponibles
TE CH NI C AL SP ECI FICATIO N S.
ELECTRICAL PROPERTIES
Connection capacity
Charging capacity
Charge mode
Fixed charging cable
Number of fixed charging cables
Charging cable length
Installation wiring
Metering
SAFETY AND CERTIFICATION
Upstream installation protection
Static power limitation
Earth leakage sensor (ELS)
Ground loss monitor
Operating temperature range
Storage temperature range
Operating humidity
Maximum installation height
Enclosure ratings
Certification
Safety Class
1 0
1-phase, 230 V, 32 A, 50 Hz.
3-phase, 400 V, 16 A, 50 Hz.
7.4 kW (1-phase - 32 A).
11 kW (3-phase - 16 A).
Mode 3 (IEC 61851) - ISO 15118*.
Type 2 plug (IEC 62196-2).
1.
4.5 m or 7.5 m.
16 A installation input terminals: 1 - 6 mm².
32 A installation input terminals: 1 - 10 mm².
Optional, for CUPRA Charger Pro.
Minimum dedicated 1-phase 32 A (32 A station) or 3-phase
16 A (16 A station) upstream circuit breaker and at minimum
RCD type A (30 mA AC). Check local installation requirements
if additional measures are required.
Via DIP-switches.
6 mA DC.
Physical connection m quality onitoring, without
ground monitoring
Via CT coils - optional comfort feature.
Invasive / non-Invasive - 40 A - 200 A,
brands: VAC, LEM, and Nidec.
See chapter Set DIP-switches for the supported models.
-30 °C - +50 °C.
-30 °C - +85 °C.
Max. 95 % - non-condensing.
Max. 4000 m above sea level.
IP54 (IEC 60529), IK10 (IEC 62262).
See EU Declaration of conformity
Safety Class I (the charging station is equipped with a
ground terminal for safety) and overvoltage Category III.
Publicidad
