Lexmark X820e Manual Del Usuario página 25

Configuring figuring
Fax Setup Setup
2
Click Configuration.
3
Click Scan to E-mail General Setup.
4
Type the SMTP gateway of your network or Internet service
provider in the appropriate field. Specify a default e-mail
address for the message reply line.
5
Click Submit.
The Telephone Consumer Protection Act of 1991 requires all
outgoing faxes to contain specific information in a margin at the top or
bottom of each transmitted page, or on the first page of the
transmission.
Use your Web browser to set the required fax information:
1
Type the MFP IP address in your browser URL field (for MFP IP address in your browser URL field (for
example, http://192.168.236.24), and press Enter.
2
Click Configuration and then click Fax Setup
3
If Analog doesn't appear in the drop-down menu, select it now.
Click Submit. If Analog does appear in the drop-down menu,
click Configuration.
4
After the configuration page refreshes, enter the required FCC
information:
— Station Name (a personal name or company name) Name (a personal name or company name)
— Station Number (the fax phone number)
5
Check the current date and time, and then select the Time
Zone, such as Eastern (USA and Canada, Eastern Standard
Time).
6
Set or change any additional fax settings.
7
Click Submit.
8
If the current date and time are not correct, click Set Date and
Time. Enter the appropriate information, and then click Submit.
If you want to configure for the Fax Server mode, return to the Fax you want to configure for the Fax Server mode, return to the Fax
Setup configuration page and switch modes.
192.168.236.24), and press Enter.
Fax Setup
x settings.
Configure your MFP
Internet service
991 requires all
.
17