Adjusting The Vertical Headlight Beam; Bulbs - APRILIA MX 125 Manual De Instrucciones

ADJUSTING THE VERTICAL
HEADLIGHT BEAM
To rapidly check the correct direction of the
beam, place the vehicle on flat ground, 10 m
away from a wall.
Turn on the low beam, sit on the vehicle
and make sure that the beam projected on
the wall is slightly under the horizontal line
of the headlight (about 9/10th of the total
height).
use and maintenance MX 125
78
To adjust the headlight beam:
Act on the suitable screw (1) by means
◆
of a screwdriver.
By TURNING IT CLOCKWISE, you set
the beam upwards.
By TURNING IT ANTICLOCKWISE, you
set the beam downwards.

BULBS

Carefully read pag. 55 (MAINTENANCE).
WARNING
Before changing a bulb, position the
vehicle on the stand and move the
ignition switch to position "
Change the bulb wearing clean gloves
or using a clean and dry cloth.
Do not leave fingerprints on the bulb,
since these may cause its overheating
and consequent breakage.
If you touch the bulb with bare hands,
remove any fingerprint with alcohol, in
o r d e r t o p r e v e n t i t f r o m b l o w i n g
frequently.
DO NOT FORCE THE ELECTRIC
CABLES
".