DOWNROD-STYLE FAN MOUNTING
1.
Remove pin (M) and clip (N) from downrod (A).
Partially loosen preassembled set screws and nut
in yoke at top of motor housing (D).
2. Insert downrod (A) through canopy (B). Thread
wires from motor housing (D) up through downrod
(A).
Slip downrod (A) into yoke, align holes and
3.
re-install pin (M) and clip (N). Tighten set screws in
yoke and then tighten nut and set screws.
1
A
N
Yoke
2
B
3
N
8
Set Screw
M
and Nut
D
A
A
Set Screw
and Nut
M