QLOCKTWO TOUCH Manual De Instrucciones página 20

Instructions for use Instructions for use
Read these instructions carefully before fi rst usage of QLOCKTWO TOUCH and comply with the Read these instructions carefully before fi rst usage of QLOCKTWO TOUCH and comply with the
safety guidelines at the end of these instructions. You can also fi nd these instructions online at safety guidelines at the end of these instructions. You can also fi nd these instructions online at
www.qlocktwo.com/info. www.qlocktwo.com/info.
The packaging contains The packaging contains
QLOCKTWO TOUCH incl. interchangeable front cover QOLOR TOUCH 135 x 135 mm QLOCKTWO TOUCH incl. interchangeable front cover QOLOR TOUCH 135 x 135 mm
Stainless steel base Stainless steel base
Self-adhesive protective strips 135 x 15 mm
Self-adhesive protective strips 135 x 15 mm
USB cable 3 m USB cable 3 m
5 V USB power supply unit
5 V USB power supply unit
Illustrated Getting Started Guide Illustrated Getting Started Guide
Instructions for use
Instructions for use
Microfi bre cleaning towel Microfi bre cleaning towel
4 4
36
Start up Start up
Remove protective fi lm Remove protective fi lm
Remove the protective fi lm on the front cover only after QLOCKTWO TOUCH has been set up. To do so, Remove the protective fi lm on the front cover only after QLOCKTWO TOUCH has been set up. To do so,
carefully remove the front cover, which is held by magnets, frontwards from the casing. Place the front cover carefully remove the front cover, which is held by magnets, frontwards from the casing. Place the front cover
on a clean, even surface and pull off the fi lm starting at one corner. Do not bend the front cover while doing on a clean, even surface and pull off the fi lm starting at one corner. Do not bend the front cover while doing
so. Then place the front cover back onto the aluminium body. so. Then place the front cover back onto the aluminium body.
WARNING! Removing the protective fi lm only applies to the acrylic glass model. WARNING! Removing the protective fi lm only applies to the acrylic glass model.
Protective strips Protective strips
To protect furniture surfaces stick the protective strips onto the bottom surface of QLOCKTWO TOUCH. For
To protect furniture surfaces stick the protective strips onto the bottom surface of QLOCKTWO TOUCH. For
an extra secure stand place the clock on the stainless steel base. an extra secure stand place the clock on the stainless steel base.
Connection
Connection
Plug the small USB plug into the power supply socket on the back of QLOCKTWO TOUCH (Ill. 2) and the large
Plug the small USB plug into the power supply socket on the back of QLOCKTWO TOUCH (Ill. 2) and the large
USB plug into the USB power supply unit. Plug the power supply unit into the electrical outlet. USB plug into the USB power supply unit. Plug the power supply unit into the electrical outlet.
Button operation
Button operation
QLOCKTWO TOUCH is operated using fi ve buttons on the rear as well as with the touch-sensitive top QLOCKTWO TOUCH is operated using fi ve buttons on the rear as well as with the touch-sensitive top
surface of the casing. The functions are accessed by briefl y pressing a button ( surface of the casing. The functions are accessed by briefl y pressing a button (
button ( button ( ) or by simultaneously pressing and holding two buttons ( ) or by simultaneously pressing and holding two buttons (
EN
) pressing and holding a ) pressing and holding a
). ).
5 5
37