Night-Light Function - QLOCKTWO TOUCH Manual De Instrucciones

Turning off the alarm function Turning off the alarm function
The alarm function is deactivated with the button ( The alarm function is deactivated with the button (
deactivated by a longer touch of the top side of the casing. deactivated by a longer touch of the top side of the casing.
12 hour principle 12 hour principle
Your QLOCKTWO TOUCH runs like a classic alarm clock in 12 hour mode: Turn the alarm off in the morning Your QLOCKTWO TOUCH runs like a classic alarm clock in 12 hour mode: Turn the alarm off in the morning
and, if needed, turn it back on in the evening. and, if needed, turn it back on in the evening.
The bell symbol The bell symbol
The bell symbol ( The bell symbol ( ) on the front shows the alarm status. ) on the front shows the alarm status.
The bell is lit up: The bell is lit up: Alarm on Alarm on
The bell is not lit up: The bell is not lit up: Alarm off Alarm off
The bell fl ashes quickly: The bell fl ashes quickly: The alarm time is displayed The alarm time is displayed
The bell fl ashes slowly: The bell fl ashes slowly: Setting the alarm time Setting the alarm time
The bell pulses slowly: The bell pulses slowly: Snooze mode Snooze mode
Setting the brightness Setting the brightness
The brightness of the LEDs adjusts automatically to the surrounding lighting with the aid of a light sensor The brightness of the LEDs adjusts automatically to the surrounding lighting with the aid of a light sensor
behind the front cover. You can fi ne-tune the brightness with the ( behind the front cover. You can fi ne-tune the brightness with the (
the colour of the front cover. You can choose from three different brightness levels. In the fourth level all the the colour of the front cover. You can choose from three different brightness levels. In the fourth level all the
LEDs will be turned off, except for the alarm symbol and you will also be in Night Touch Mode, which will be LEDs will be turned off, except for the alarm symbol and you will also be in Night Touch Mode, which will be
explained next. The clock and the alarm will continue to function normally. explained next. The clock and the alarm will continue to function normally.
Night Touch Night Touch
The Night Touch Mode is activated with the fourth brightness setting level ( The Night Touch Mode is activated with the fourth brightness setting level (
display is turned off. If the alarm is activated then only the alarm symbol will shine. To read the time simply display is turned off. If the alarm is activated then only the alarm symbol will shine. To read the time simply
touch the top side of the casing and the time will appear for 2 seconds. If you touch the clock twice in a row touch the top side of the casing and the time will appear for 2 seconds. If you touch the clock twice in a row
the alarm time will appear. The Night Touch Mode is exited by turning off the alarm or with the brightness the alarm time will appear. The Night Touch Mode is exited by turning off the alarm or with the brightness
button. button.
8 8
40
). If the alarm is active or in snooze mode, it can also be ). If the alarm is active or in snooze mode, it can also be
) button depending on the lighting and ) button depending on the lighting and
). In this setting the time ). In this setting the time
Special functions, pressing and holding the buttons ( Special functions, pressing and holding the buttons (

Night-light function

Night-light function
A longer pressing of button ( 60 ) activates the night-light function. All of the letters will light up. Pressing A longer pressing of button ( 60 ) activates the night-light function. All of the letters will light up. Pressing
a button again will end this mode. a button again will end this mode.
Second mode Second mode
To enter the Second Mode press the ( 1 ) button for longer than 3 seconds. The seconds will appear as big To enter the Second Mode press the ( 1 ) button for longer than 3 seconds. The seconds will appear as big
numbers in the matrix. By pressing any button QLOCKTWO TOUCH will return to normal operation. numbers in the matrix. By pressing any button QLOCKTWO TOUCH will return to normal operation.
Special functions, simultaneously pressing and holding the buttons ( Special functions, simultaneously pressing and holding the buttons (
Turn "IT IS" on/off Turn "IT IS" on/off
The introductory words "IT IS" can be turned on and off. To do so, press the ( 1 ) and buttons ( The introductory words "IT IS" can be turned on and off. To do so, press the ( 1 ) and buttons (
simultaneously for approx. 3 seconds. The words always appear when the mode is activated. In "Purist simultaneously for approx. 3 seconds. The words always appear when the mode is activated. In "Purist
Mode" (factory setting) "IT IS" only appears every full and half hour. Mode" (factory setting) "IT IS" only appears every full and half hour.
) )
EN
) )
) )
9 9
41