SICK WS14-2 Manual De Operación página 4

8016167.YFQ1 | SICK
Subject to change without notice
Refer to Graphics C and G to check the function. If the switching output fails to
behave in accordance with Graphic C, check application conditions. See section
Fault diagnosis.
Sender
Receiver
Sender
Sensor with potentiometer (WS/WE14-2P410S01):
The sensitivity is adjusted with the potentiometer (type: 360°). Clockwise rotation:
operating reserve increased; counterclockwise rotation: operating reserve reduced.
We recommend setting the potentiometer to "Maximum".
The sensor is adjusted and ready for operation. Refer to Graphics C and G to check
the function. If the switching output fails to behave in accordance with Graphic C,
check application conditions. See section Fault diagnosis.
The sensor is adjusted and ready for operation. Refer to Graphics C and G to check
the function. If the switching output fails to behave in accordance with Graphic C,
check application conditions. See section Fault diagnosis.
PNP
Q 1
0
1
_
Q
0
NPN
1
Q
0
_
Q 1
0
Image: C
3
COMMISSIONING
Receiver
Sender
Receiver
3