Inspecting For Damage; Installation Sequence - Creative Cambridge SoundWorks Digital Guia Del Usuario

Inspecting For Damage

Examine each speaker unit carefully
for shipping damage. If there is any,
do not install or use the system. For
advice, call the store where you
made your purchase.
All of the items shown in the
illustration below should be included
with your system.
Subwoofer/amplifier
Satellite speakers (2)
Please note that the type of adapter
supplied varies according to country.
If anything is missing, contact the
retailer where it was purchased.
Save the carton and its inserts in
case you need to ship or move your
SoundWorks Digital system later.
Stereo audio cable,
15 VDC external
power supply 6ft / 2m (Green miniplugs)
Volume with 6ft / 2m audio
connecting cable
RCA-to-mono cable
Desktop stands for
satellites (2)

Installation Sequence

1. Read through the instructions
before installing the speakers.
2. Place the satellites and
subwoofer at appropriate sites
near your computer.
3. Connect the satellites to the
subwoofer. Leave all the wires
accessible.
4. Connect your sound card output
to the subwoofer.
9ft / 3m speaker wires for
connecting satellites (2)
Stick-on feet for cubes
RCA-to-RCA
(2 sets)
Cable, 6ft / 2m
Wall-mounting hardware
for satellites (2)
5. Connect the volume control to
the subwoofer.
6. Connect the power supply
adapter to the subwoofer.
7. Listen to the system and adjust
the bass level control for
pleasing bass output.
8. You may wish to experiment
with satellite placement briefly
before concealing the connecting
wires and making the installation
permanent.
Semipermanent mounting strip
for attaching volume control
"Hook and loop" for attaching
satellites to computer monitor (4)
7