Installation Steps; Care And Cleaning - AVS Bugflector Instrucciones De Instalación

Installation Steps

Insert (2) plastic screw retainers into
square holes in hood.
3
Install (4) screws with washers to
secure deflector to hood.
5
NOTE: DO NOT OVER TIGHTEN
Apply bump ons to surface of hood
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
800-241-7219 • Visit us at lundinternational.com
© 2012 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Set the wind deflector in place with the tabs sliding
between the hood and rubber seal and align with holes.
hood shield
seal
washer
screw
4
6
Lund International
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
Close Hood.