Installation Steps - AVS Ventvisor Deflector Instrucciones De Instalación

Installation Steps

Door mount style, go to step 2.
1
Lower the glass. Buff the rubber
window trim where visor will attach.
2
Remove the tape liner from the front flange. Peel back
2" (5 cm) of tape liner from each end of top flange.
top flange
rear
flange
4
NOTE: Actual application may vary slightly from drawings.
Determine your side mirror style.
free end
front
flange
Corner mount style, go to step 8.
Clean the rubber window trim & corner
3
Attach the front flange to the corner panel. Attach the
top and rear flanges to the rubber window trim. Remove
tape liner by pulling on free ends.
5
Page 2 of 3
panel where visor will attach.